Quantum Blue
®
Reader Software User Manual, Version 4.0
Release Date: 01-02-2021
10
CHAPTER 3: RUNNING QUANTUM BLUE
®
READER WITH QBSOFT
CHAPTER 3: RUNNING QUANTUM BLUE
®
READER WITH QBSOFT
3.4 Measurement
Click on “Measurement” (Fig. 2, No. 1) to perform a test run using the QBSoft Software. This function allows
the user to select a Test Method stored on the Quantum Blue
®
Reader and to scan a test cassette.
The system is ready for measurement, if the status bar at the bottom of the screen shows “Connected”
(Fig. 2, No. 2), “Drawer Closed” (Fig. 2, No. 3) and “Ready” (Fig. 2, No. 4). Also displayed in the status bar is
the memory status of the Quantum Blue
®
Reader. This example shows that 79 test results are currently stored
in the memory of the reader (Fig.2, No.5).
Fig. 2: Measurement screen
1
2
3
4
5