TC-Standard (+) X2
TC-S
Model TC-S 6121
(X2)
Model TC-S 6122
(X2)
Rated cooling capacity (at 25 °C)
100 kJ/h
Rated cooling capacity (at 25 °C)
90 kJ/h
Max. Ambient temperature
40 °C
Max. Ambient temperature
50 °C
Dew point fluctuations
static
in the entire specification range
± 0.1 K
± 1.5 K
Dew point fluctuations
static
in the entire specification range
± 0.1 K
± 1.5 K
Temperature difference between heat exchangers
< 0.5 K
Temperature difference between heat exchangers
< 0.5 K
TC-Standard
Limit for
2x MTG-2
Ambient temperature (°C)
Cooling capacity (kJ/h)
Limit for
2x MTV-2
TC-Standard
Limit for
2x MTG-2
Ambient temperature (°C)
Cooling capacity (kJ/h)
Limit for
2x MTV-2
Note: The limit curves for the heat exchangers MTV-2 and MTG-2 apply to a dew point of 50 °C.
9.5 Heat exchanger
9.5.1 Heat exchanger description
The energy content of the sample gas and the required cooling capacity of the gas cooler is determined by three parameters: gas
temperature
ϑ
G
, dew point
τ
e
(moisture content) and volume flow v. The outlet dew point rises with increasing energy content of
the gas. The following limits for the maximum flow are specified for a standard operating point of
τ
e
= 40 °C and
ϑ
G
= 70 °C. Indic-
ated is the maximum flow v
max
in Nl/h of cooled air, so after moisture has condensed. Values may differ for other dew points and
gas inlet temperatures. However, the physical facts are so vast we decided to omit the illustration. Please contact our experts for
clarification or refer to our design program.
38
Bühler Technologies GmbH
BE440023 ◦ 10/2018
