Bühler technologies TC-Double Plus, Инструкция по установке и эксплуатации, Страница: 5 / 49

TC-Double (+)
1 Introduction
1.1 Intended use
This unit is intended for industrial use in gas analysis systems. It's an essential component for conditioning the sample gas to
protect the analysis instrument from residual moisture in the sample gas.
Please note the specifications in the data sheet on the specific intended use, existing material combinations, as well as pressure
and temperature limits.
1.2 Overview
The TC-Double series was designed specifically for high cooling capacities, high ambient temperatures and to cool in two cycles
to minimise wash out effects. The two cooling blocks on the TC- can be set do different temperatures.
Any other use of this cooler is determined by the type of built-in passive pre-cooling, i.e. the first cooling level is not controlled
electronically.
The Peltier cooler is distinguished by two types according to cooling capacity or operation temperature. This classification is re-
flected in the type designation. The exact item number of the model defined by you is determined by the model code in the cat-
egory ordering information.
Application Standard applications
Operation temperature 40 °C 50 °C
2 heat exchangers in series TC-Double 6111 TC-Double 6112
2 heat exchangers in series TC- 6111 TC- 6112
Additional components which every conditioning system should feature can optionally be integrated:
– Peristaltic pump for condensate separation,
– Filter,
– Moisture detector,
– sample gas pump.
In addition, we offer different signal outputs:
– Status output
– Analog output, 4…20 mA, incl. status output,
– Modbus RTU digital output, incl. status output
This allows for various configurations of cooler and options. Here the approach is to simplify creating a complete system in a
cost-efficient way through pre-installed components with hoses connected. We further paid attention to easy access to wear
parts and consumables.
1.3 Scope of delivery
– Cooler
– Product documentation
– Connection-/mounting accessories (optional)
3 Bühler Technologies GmbH BE440021 ◦ 09/2021