Bühler technologies Nivotemp NT M-XP, Инструкция по установке и эксплуатации, Страница: 13 / 42

Nivotemp NT M-XP
5.5 Menu overview
The menu structure is based on the VDMA standard sheet 24574-1. The menu structure is hierarchic. The top menu level contains
the main menu items, e.g.
oil , tEMP , b.EF , diA , E . Each main menu contains additional submenu items.
The menu items may vary depending on the device configuration. Not all menu items described below will necessarily apply to
your device. Press the
key in display mode to open the configuration. A 4-digit code will appear, e.g.
With the 4 digits tsav meaning:
t: Model
s: Number of switching outputs
a: Number of analogue outputs
v: Device installation type
o = level and temperature measurement
2, 4 or 6
0 for 2
i = standard installation (tank installation)
Configuration
Equipment configuration
o___i
____
oiI
Display
Measurement display
Level
Liquid Level main menu
out1
Settings menu OUT1
Out 1
out_
Settings menu OUTX
Out X
An 1
Settings menu Analog 1
Analog Out 1
E
Exit menu level
Exit
out_
Settings menu OUTX
Out X
out_
Settings menu OUTX
Out X
An 2
Settings menu Analog 2
Analog Out 2
E
Exit menu level
Exit
tEMP
Temperature main menu
Temperature
b.EF
Basic Adv. Functions
Basic EF
If applicable
If applicable
If applicable
If applicable
If applicable
DiA
Diagnostics menu
Diagnostic
E
Exit menu level
Exit
____
____
Toggle display
Toggle
The individual menu items will not be shown if the option does not apply. Example: With a=0 the menu items for configuring
the analogue output does not apply. You can then skip the description for this item.
The structure of main menu
Liquid Level
( oil ) and
temperature
( tEMP ) is identical. Here you can configure the switching out-
puts or the analogue outputs (if applicable).
11 Bühler Technologies GmbH BE100023 ◦ 06/2021