( Instructions continued on next page )
Page 1
Parts list
Qty. Description
1 Top shelf with decal
1 Middle shelf
1 Bottom shelf
2 Legs (Labeled "O")
2 Legs (Labeled "X")
2 Horizontal mount
3 Set Screws and serrated nuts (E)
1 Electrical bracket
1 Power cord
1 Handle (Optional)
Qty. Description
25 Set Square head bolts, washer and serrated nuts (I)
2 Casters with brakes
2 Casters without brakes
2 Security screw (G)
2 Hex head screw (H)
2 Pole for supporting flat panel TV
2 Security screw for mounting the pole (F)
4 Set Screws and serrated nuts for pull out shelf (J)
1 Set Side extended pull out shelf
Tools required
Hex wrench
L key
Adjustable wrench/pliers
Rubber mallet
PLC4418E
Screw table
1.
Lay front legs (labeled "O" and "X") on the floor with the brackets
facing upward and inward as illustrated. Note: legs,when placed
on the floor should bend upward, off the floor at their top end and
the width of the unit should remain constant all the way to the top.
2.
Slide each shelf over the brackets of the legs. The largest shelf is
the bottom. The top shelf has the
Buhl
decal on it.
3.
Slide the two remaining legs onto the shelves as illustrated. Make
sure that the brackets are inside the shelves.
4.
HAND TIGHTEN the top, middle and bottom shelves at the two
corners with square head bolt, washer and nut (see screw table I)
as illustrated. Please make sure washer and nut are together on
the inside of the leg bracket.
Instruction sheet --
Buhl
Flat panel TV cart
Model number: PLC4418E
Congratulations for having chosen this excellent Buhl product.
To assure your complete satisfaction, this product is warranted against defect in
manufacture for one year after the purchase date. Any parts requiring replacement
during the 1--year period, under normal use and service, as a result of defective
workmanship, will be replaced by Buhl or by an authorized Buhl dealer, without cost,
except for transportation charges. All unit should be returnd in original packing to
guarantee safe transport. Buhl is not responsible for damage in shipment.
Some screws may have already
screwed on the related parts.
Pole
Horizontal mount
Note: This unit is easier to assemble with two people.
"X"
"O"
