■
Precautions for radio signals
●
The wireless LAN card
WLI2-CF-S11
has been approved for conformity
to the engineering standards as the wireless facility for a radio station
with the low power data communication system based on the Wireless
Telegraphy Act. Therefore, use of this LAN card does not require any
radio station license.
●
Never use the
WLI2-CF-S11
near the magnetic field around a
microwave oven or in an area where static electricity and/or radio noise is
generated. The radio signals may not be normally transmitted in these
areas.
* When the WLI
2-CF-S11
is used near a wireless printer buffer
(BUFFALO's RYP-G or similar products by other manufacturers) that
use radio signals around 2.4 GHz, the processing speed of both
devices may be adversely affected.
●
As the WLI
2-CF-S11
has been approved for conformity to the
engineering standards, the following may be regarded as unlawful.
• Disassembling/remodeling the WLI
2
-CF-S11
• Removing the approval label from the rear of the WLI
2
-CF-S11
●
When it is necessary to set a radio channel other than the initial setting in
the WLI
2
-CF-S11, use the same frequency band as the following
equipment or wireless stations
• Industrial, scientific, or medical equipment
• Radio station for mobile identification used such as on a manufacture
line in a factory
①
On-premise radio station (requiring a license)
②
Specific low power radio station (requiring no license)
●
Operating the WLI
2
-CF-S11 may cause interference with the above
equipment or radio stations. Thus, take precautions for the following
points
1 Before using the WLI
2
-CF-S11, verify that no on-premise radio
station for mobile identification or no specific low power radio
station is operating near the WLI
2
-CF-S11.
2 If an event of interference should be taken place by the WLI
2
-CF
-
S11 with an on-premise radio station for mobile identification,
WLI-CF-S11G.book 0 ページ ２００２年２月２７日 水曜日 午後９時１０分
Содержание WLI2-CF-S11
Страница 10: ...WLI CF S11G 8 MEMO WLI CF S11G book 8...
