After confirming that the
target location for the
software to be installed to is
acceptable, click
Next
to
continue with installation. If
an alternate location for
installation should be used,
click
Browse,
select the
custom target location and
click
Next
to continue.
Click
Next
in the “
Start
Copying Files
” window
to begin copying the
files needed for
Client
Manager
installation.
When installation of
Client Manager
has
completed,
reboot the
computer after clicking
Finish
.
Note: The wireless card
and Client Manager will
not function properly
together until the system
has rebooted.
Configuring Client Manager
To open
Client Manager
, click
Start
, click
Programs
and click
Client Manager
within the
AirStation Utility
location on the Start Menu.
Once
Client Manager
has opened, click
File
and click
Manual
to display manual
settings. Clicking
Scan
will display a list of detected wireless access points.
Select the access point that you wish to connect to and click
OK
to return to the
Manual Setting
window. Click
Add
to permanently save the access point’s SSID or
network name into
Client Manager
’s SSID table for easier future connections. Click
OK to establish a connection with the access point.
The first time that an attempt to a particular access point is made, a “
Verify
Connection
” window is displayed. Make certain that “
Renew IP Address
” is selected.
Also from this window,WEP key information should be entered if the access point to
which the wireless card is connecting requires encryption.
Click
OK
to complete the configuration of the wireless adapter and establish the
wireless connection.
Preparation
This Quick Setup Guide will guide you through quickly
and easily installing this product. For detailed setup
and configuration instructions, please refer to the
Online Manual on the AirNavigator CD-ROM.
Package Contents Checklist
◗
Wireless CardBus
(WLI-CB-G54/WLICBG54R)
◗
Setup CD-ROM with User’s Manual
◗
Quick Setup Guide
◗
Warranty Card
If any of the contents are missing, please contact
the reseller from which this product was
purchased.
System Requirements
◗
Notebook PC with a 32-bit Cardbus slot
available
◗
10 MB of available disk space for driver and
utility installation
◗
An 802.11b or 802.11g access point for
Infrastructure Mode or another computer
with an 802.11b or 802.11g wireless
adapter for Ad-Hoc Mode
Depending on the version of your operating
system, the installation of the WLI-CB-G54
adapter may vary.
◗
For
Windows 98/ME/2000
computers,
refer to the guide titled
Windows
98/ME/2000 Installation and Configuration.
◗
Once Windows 98/ME/2000 has successfully
installed the
AirStation
wireless adapter,
please continue the setup using the
guide titled
Client Manager Installation
and Configuration.
◗
For
Windows XP Home/Professional
computers, refer to the guide titled
Windows
XP Installation and Configuration.
◗
Once Windows XP has successfully
installed the
AirStation
wireless adapter,
the
native
XP Wireless Zero
Configuration
service can be used,
requiring no additional steps to begin using
the wireless adapter. See
Windows XP
Installation and Configuration
for further
details.
www.buffalotech.com/wireless
¤
Quick Setup Guide
54 Mbps/2.4 GHz Wireless CardBus Card
WLI-CB-G54/WLICBG54R
WLAR-L11G-L
WLMR-L11G
WBR-B11 / WBR-G54 / WBRG54R
WLI-PCM-L11 / L11G / L11GP
WLI-USB-L11G
WLI-PCI-OP / WLI-ISA-OP
WLIL-CF-S11G
WLI-USB-KS11G / WLI-CB-G54 / WLICBG54
Windows XP may display a
window asking whether to
continue installation due
to Windows Logo testing.
Click the
Continue
Anyway
button to
complete the
AirStation
installation process.
Once Windows XP
reports that the adapter
has been successfully
installed, click
Finish
and
reboot your computer if
prompted to by Windows.
Windows will suggest
the previously installed
driver to be used for the
AirStation
adapter.
The driver Version,
Location and the
Manufacturer may be
detailed as well. Choose
the most recent driver
version displayed if
multiple drivers are
listed. Click
Next
to
continue installation of
the wireless adapter.
Buffalo Technology
Technical Support
Thank you for choosing the Buffalo Technology AirStation G54 WLI-CB-G54. Should you
require additional assistance, please use any of the available support options described
below.
For a complete user guide detailing installation, configuration, and troubleshooting of this
product, please insert the packaged AirNavigator CD-ROM and view the Online Manual.
The constantly evolving state of wireless products and the operating systems they interact with
requires Buffalo Technology to occasionally release updated software to take advantage of new
technologies and to comply with industry standards. For our most recent software,firmware,
driver and technical whitepaper releases please visit the Buffalo Technology website.
Buffalo Technology offers lifetime free technical support for this product. Customers in the
United States can contact Buffalo Technology Technical Support via our website or by our
toll-free phone technical support.
Buffalo Technology Technical Support
via the Internet
www.buffalotech.com/wireless
[email protected]
Buffalo Technology Technical Support
via the Phone
(866) 752-6210
Copyright © 2002 - All Rights Reserved - Buffalo Technology, Inc.
Buffalo Technology (USA) Inc., is part of MELCO INC., the global manufacturers of IT peripherals including
memory, networking and multimedia products, inside many of the world’s computers.All trademarks are
property of their respective owners.
Click
Next
to confirm
the “
Driver Files Search
Results
” window.
Click
Yes
when prompted
to add a shortcut for
Client Manager
to your
Windows Startup menu.
This will allow
Client
Manager
to run at startup
when your laptop is booted.
Windows XP Installation
and Configuration
Step
Installing
WLI-CB-G54 Drivers
for Windows XP
Note: Do not insert the
wireless adapter into
the computer prior to
completing Step
!
Insert the
AirNavigator
CD-ROM
into the laptop
CD-ROM drive. The
Air
Navigator Setup Wizard
should launch automatically.
If it does not launch auto-
matically, click
Start
, click
Run
, type
D:\SETUP.EXE
into the provided field and
click
OK
(assuming D: is
the letter assigned to the
CD-ROM drive).
Once
AirNavigator
launches, check that “
Install
Wireless LAN Adapter
”
is selected and click
OK
.
Review the
Software
License Agreement
and
click the
Yes
button to
confirm your agreement and
continue with the installation
of the adapter card drivers.
Clicking
No
will abort the
installation process.
Step
Installing the
Wireless Card into
Windows XP
Insert the
AirStation
wireless adapter with the
Buffalo logo facing up into an
available CardBus slot. The
CardBus slots are usually
found on either the left or
right side of the laptop.
The
“Found New
Hardware Wizard”
should
launch. (If not, remove the
wireless card, reboot the
computer and reinsert the
wireless card once Windows
has restarted.) Make sure
that “
Install the software
automatically
” is selected and
click
Next.
▲
1
▲
4
(Actual card style may vary)
BT.G54 Quick Set Up Guide.21.03 1/23/03 2:06 PM Page 1