ÐÏ×ÅÒ
ÉÎÔÅÒÎÅÔ
ÌÁÎ
ᴮ
ᴯ
ᴰ
ᴱ
power outlet
AirStation wireless router
(rear side)
PC
1) connect
1) connect
Ethernet cable
2) connect the power supply
WCR-HP-GN User Manual
18
Chapter 3 Installation
WDS Setup (Manual)
To configure the WDS manually, follow the procedure below.
1
Change your computer’s IP to a fixed address. For details, please refer to Appendix C (page 95).
ex) IP address
192.168.11.80
Subnet mask
255.255.255.0
Default gateway
blank
Preferred DNS server blank
Alternate DNS server blank
2
Turn off your computer.
3
Connect your computer to one of the AirStation’s LAN ports with the Ethenet cable.
Turn on the AirStation, wait one minute, and then turn on your computer.
4
Wait for about a minute, until the AirStation’s LEDs are lit as described below:
Power
Green light is on
Wireless
Green light is on
Router
Green light is on
Diag
Off
※
Refer to page 7 for LED locations and other details.