Buffalo TeraStation WS5200DN2, Руководство пользователя

Страница: 91 / 109

Items Descriptions
Send to
Adds a new receiver for the notification email. Click New to add a new
email address. Click Edit to change the receiver settings or Delete to
remove an address from the list.
Note:
Up to 5 email address may be added.
SMTP Server
Enter your email SMTP server's address and port number. Port
number 25 is configured by default.
Note: If you choose "None" or "POP before SMTP" for the user
authorization, the port number is locked to "25".
Authentication
Select the user authorization type from "None", "POP before SMTP",
"LOGIN (SMTP-AUTH/LOGIN)", and "CRAMMD5 (SMTP-AUTH/CRAM-
MD5)". If "POP before SMTP" is selected, enter the POP server address,
port number, username, and password. Unless specified otherwise,
the standard port number (110) is used.
SSL/TLS
If "LOGIN (SMTP-AUTH/LOGIN)" or "CRAMMD5 (SMTP-AUTH/CRAM-
MD5)" is selected, select whether to use SSL or TLS.
Title Enter the subject of the notification email.
Contents
Email server address: Check "IPv6" to add IPv6 compatibility to the
email notifications.
Select the event that will trigger the notification emails to be sent.
Status report: Sends regular notification emails at the specified time.
Disk error: Sends an email when a hard drive error occurs.
At boot: Sends an email when the system is booted or restarted.
Fan failure: Sends an email when a fan error occurs.
Temperature error: Sends an email when the TeraStation temperature
exceeds normal levels.
Specify event ID: Sends an email when the specified event IDs are
logged. Enter an event ID to trigger email notifications.
Test Message Sends a test email to the email address which is configured.
LCD Panel Settings
You may configure the LCD on the front of the TeraStation.
1
From the Windows Storage Server Start menu, click Display Settings .
90