Buffalo TeraStation III TS-IXL, Руководство пользователя

Страница: 40 / 65

TeraStation III iSCSI User Manual 39
Initializing Settings
Hold down the reset button until it beeps (about 5 seconds). This will reset the TeraStation’s settings to their factory
defaults.
• The reset button initializes the following settings: IP address, Ethernet frame size, admin username and password, port
trunking (initial setting: disabled), iSCSI HDD Connection Tool detection (initial setting: enabled). Other settings can be
initialized from the Web Admin interface (page 40).
• To keep the current username and password when initializing the TeraStation, navigate to [Maintenance] - [Restore/
Erase]- [Restore Factory Defaults] - [Modify Settings] in the Web Admin interface and select [Keep current admin
password]. Click [Save].
If you disable resetting the admin password from the reset button, you can no longer configure the TeraStation if you
forget the password. Write down your password and keep it in a safe place.
Reset Button
To reset the TeraStation’s settings to factory defaults, use the key (included) to open the front cover. While the
TeraStation is running and the power LED is lit, hold in the button to initialize the TeraStation.
TS-RIXL
Reset Button
To press the Reset Button on TS-RIXL Series, insert a tip of unfolded paper clip to
press this button.
TS-IXL
Reset Button