Buffalo TeraStation III TS-IXL, Руководство пользователя

Страница: 16 / 65

TeraStation III iSCSI User Manual 15
Create Volume
By default, the TeraStation is configured with a single volume using all available space on the TeraStation. If you delete
the factory volume, you may create up to 32 volumes from the resulting space. Different volumes can be connected to
different computers, but each volume can only be connected to a single computer.
Notes:
• Deleting the default volume will delete all data from the TeraStation. Back up any important data before making any
configuration changes!
• Enable LVM (previous page) to delete or create volumes.
1
2
3
4
Click [Save].
5
Turn back on [iSCSI Service].
Note:
To start iSCSI service for the target volume only, navigate to [iSCSI Volumes] - [iSCSI Volumes], select the target
volume, and click [Activate].
You have created a new volume.
Note:
To use the new volume, you need to connect it (page 11), and format it with [Disk Management] on Windows. You may
open [Disk Management] from the iSCSI Hard Disk Connection Tool by clicking [Launch Disk Management] from the
[Setup] menu.
Enter [Volume Name], [Volume Description], [Disk Area], and [Size].
Turn off [iSCSI Service] on the left side of the Web Admin interface.
Note:
To stop iSCSI service for the target volume only, navigate to [iSCSI
Volumes] - [iSCSI Volumes], select the target volume, and click
[Inactivate].
Navigate to [iSCSI Volumes] - [iSCSI Volumes]. Highlight the default
volume and click [Delete Volume]. Then, click [Create Volume].