Buffalo TeraStation III TS-IXL, Руководство пользователя

Страница: 15 / 65

TeraStation III iSCSI User Manual 14
Chapter 4
Using Logical Volume Manager (LVM)
Enable/Disable Logical Volume Manager (LVM)
Logical Volume Manager (LVM) is disabled by default. Enabling LVM will allow you to divide volumes and extend
capacity, but will degrade access speeds.
Note: Changing the operation mode of a disk or array (such as enabling LVM) will delete all volumes and data from the
disk or array. Back up any important data before making any configuration changes!
1
2
3
The [Confirm Operation] screen will appear.
Enter the displayed number and click [Apply] within 60 seconds.
LVM is now enabled.
Select the RAID array or the drive from [Disk Area], and click [Enable
LVM] or [Disable LVM].
[Confirm Operation] screen
The following tasks open the [Confirm Operation] screen. To complete the task, enter the displayed number and
click [Apply] within 60 seconds.
• Creating or deleting RAID arrays
• Initialization
• Formatting drives
• Set as a normal drive
• Delete iSCSI volume
• Format Array or Disk
• Unplug hard drives
• Rebuild RAID Array
• Configure hot spare
• Enable or disable LVM
In Web Admin interface, navigate to [iSCSI Volumes] - [LVM].