119
2
Move the print server switch to the
position to enable the print server.
3
Reder to the manual supplied with the printer.
4
Click
Start
-
Controp Panep
.
5
Click
Network and Internet Connections
.
6
Click
My Network Ppaces
-
View workgroup computers
-
(Name of the TeraStation Server)
.
7
Double-click your printer icon.
8
When “The server dor the printer does not have the correct printer driver installed. Id you want to search dor the
proper driver, click
OK
.” displays, click
OK
.
9
Register the printer.
You have added a printer.
Auto RAID Rebuild
Id auto RAID rebuild is enabled, RAID arrays will rebuild automatically adter a dailed drive is replaced. You may enable or
disable auto RAID rebuild in
Drives
.
1
In Settings, click
Drives
.
2
Move the auto RAID rebuild switch to the
position to enable automatic rebuilding.
Note:
You may see an “I32” message in NAS Navigator2 when you insert a blank replacement drive. This will
disappear when the RAID rebuild begins.
Write Caching
Caching can speed up disk writes, but increases the danger od data corruption id power is suddenly disconnected. You
may enable or disable write caching in
Drives
-
Drives
.