manualshive.com logo in svg

Buffalo TeraStation 5010, Руководство пользователя

Баффало TeraStation 5010 - надежное хранилище данных для вашего бизнеса. Скачайте бесплатное Руководство пользователя с инструкциями по использованию устройства на manualshive.com. Здесь вы найдете все необходимые сведения о настройке и использовании этого мощного сетевого хранилища данных.

Поделиться
Скачать
background image

78

If the backup TeraStation has not received a packet from the main TeraStation within a specified time, the backup 
TeraStation considers the main TeraStation to have failed. By default, it will try 5 times and wait 60 seconds. If this 
is triggered by accident, reconfigure failover from the main TeraStation.

•  Errors

Failover will occur if any of the following errors occur:
E12 (cooling failure), E14 (cannot mount RAID array), E16 (drive not found), E22 (cannot mount drive), E30 (drive 
failure)

Notes: 

•  Only use identical model and capacity TeraStations for failover. If the capacity of the main TeraStation is larger 

than that of the backup TeraStation, an I33 replication error will occur.

•  All drive bays of a TeraStation should be occupied if it will be used for failover. Failover will not work if a drive 

is missing from any bay.

Usage Restrictions

Functional Restrictions

Failover is not available when any of the following functions are enabled:
Replication, sleep mode, encrypted drive volume, LVM volume, iSCSI volume, port trunking, cloud storage, Dropbox 
Sync, hot spare, access restrictions by Active Directory domain

Setting Restrictions

The following functions will not be available while failover is enabled:
Initializing settings, changing the RAID settings, formatting drives, iSCSI volume, changing the backup unit's 
settings, turning the TeraStation on and off, updating the firmware.

While failover is enabled, shutdown, power-on, and firmware update operations can be made available by 
temporarily changing the TeraStation to maintenance mode. Maintenance mode can be enabled or disabled at 

Backup

 - 

Failover

 in the main TeraStation's Settings. Click 

Maintenance mode

 to enable maintenance mode, or click 

Cancel maintenance mode

 to disable maintenance mode.

To update the firmware while in maintenance mode, the main TeraStation can be updated from Settings, but the 
backup TeraStation cannot. Download the firmware updater from the Buffalo website for the backup TeraStation 
and try updating the firmware through it.

Non-Transferable Settings

The settings below are not copied from the main TeraStation to the backup TeraStation. Make a note of the original 
settings so that they can be configured manually if failover errors.
WebAccess

*

, UPS synchronization, SNMP (when using SNMPv3), the backup job settings either if specifying shared 

folders on the backup TeraStation or USB drives as the backup destination, and USB drives' shared folder settings
* After failover, re-register your BuffaloNAS.com account for WebAccess on the new main TeraStation if LAN port 1 is 
assigned a new static IP address or using DHCP. If the new main TeraStation inherits the original static IP address for 
LAN port 1, WebAccess settings will be transferred and you will not need to reconfigure it.

Using with UPS

Once failover is configured, you cannot set up a UPS for the backup TeraStation. Configure your UPS before 
configuring failover. UPS recovery can be configured for both the main and backup TeraStations. However, the UPS 
settings of the main TeraStation will not be copied to the backup TeraStation.

Содержание TeraStation 5010

















































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TeraStation 5010

D-Link NetDefend DFL-260E Reference Manual preview
NetDefend DFL-260E
Бренд: D-Link Страницы: 328
D-Link ShareCenter Pulse DNS-320 Quick Install Manual preview
ShareCenter Pulse DNS-320
Бренд: D-Link Страницы: 2
D-Link DFL-210 - NetDefend - Security Appliance Firewall Registration Manual preview
DFL-210 - NetDefend - Security Appliance
Бренд: D-Link Страницы: 19
D-Link DFL-M510 Faq preview
DFL-M510
Бренд: D-Link Страницы: 22
D-Link DFE-680TX Quick Install Manual preview
DFE-680TX
Бренд: D-Link Страницы: 4
Dahua N300 Quick Start Manual preview
N300
Бренд: Dahua Страницы: 12
D-Link NetDefend DFL-1600 Quick Manual preview
NetDefend DFL-1600
Бренд: D-Link Страницы: 23
Accuphase AD-60 Instruction Manual preview
AD-60
Бренд: Accuphase Страницы: 2
ADTRAN ATLAS 550 Manual preview
ATLAS 550
Бренд: ADTRAN Страницы: 2
Acrosser Technology AMB-VDX3H1 Series Quick Start Manual preview
AMB-VDX3H1 Series
Бренд: Acrosser Technology Страницы: 4
SMART MOD IIC Installation And Service Manual preview
MOD IIC
Бренд: SMART Страницы: 15
H3C S12500R-2L Installation Manual preview
S12500R-2L
Бренд: H3C Страницы: 77
Delta M125HV-113 Quick Installation Manual preview
M125HV-113
Бренд: Delta Страницы: 2
ZyXEL Communications ADSL/ADSL2/ADSL2+ Router 660R-6xC Series User Manual preview
ADSL/ADSL2/ADSL2+ Router 660R-6xC Series
Бренд: ZyXEL Communications Страницы: 282
iBall Baton 150m Configuration Manual preview
150m
Бренд: iBall Baton Страницы: 9
RuggedCom RUGGEDMAX WIN7000 Installation Manual preview
RUGGEDMAX WIN7000
Бренд: RuggedCom Страницы: 42
BWI PCI Duo/TP User Manual preview
PCI Duo/TP
Бренд: BWI Страницы: 5
ebm-papst W3G710-NK67-01 Operating Instructions Manual preview
W3G710-NK67-01
Бренд: ebm-papst Страницы: 13

Бренды по названию

Популярные бренды

Загрузить еще бренды