Buffalo TeraStation 5010 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 176

Buffalo TeraStation 5010 Скачать руководство пользователя страница 37

36

RAID 1

Combines 2 or more drives into a mirrored array. The available space in the array is the capacity of a single drive.
Identical data is written to each drive. If a drive is damaged, data can be recovered by replacing the damaged drive.
As long as one drive in the array remains undamaged, all data in the array can be recovered.

RAID 0

Combines 2 or more drives into a single array. The usable drive space is the total space of all drives used. This simple
RAID mode offers faster performance than RAID modes that include parity. If a single drive in the array fails, then all
data in the array is lost.

JBOD

This mode uses the drives inside the TeraStation as individual drives. The drive space you can use is the total
capacity of all drives in the TeraStation. If any drive is damaged, then the data on that drive is lost.

Working with RAID Arrays

To change RAID settings, navigate to

Storage

-

RAID

in Settings.

Using JBOD

With JBOD, each drive in the TeraStation is addressed separately. To put drives from an array into JBOD, follow the
procedure below.

1

In Settings, click

Storage

.

2

Click

to the right of "RAID".

3

Click the array to delete.

«
...
35
36
37
38
39
...
»

Содержание TeraStation 5010

















































































































































































Отзывы:

Нет отзывов