Buffalo TeraStation 5010 Скачать руководство пользователя страница 123

Страница: 123 / 176

122

Restoring Factory Defaults

Initializing from Settings

To initialize the TeraStation to its factory defaults from Settings, follow this procedure.

In Settings, click

Management

Click

to the right of "Restore/Erase".

Click

Initialize TeraStation

The "Confirm Operation" screen will open. Enter the confirmation number, then click

. The TeraStation will

be restored to its factory default settings.

When the "finished" message is displayed, restoring settings is finished. Click

Initializing with the USB Initialization Drive

An initialization drive will restore the settings on your TeraStation to their factory defaults. You can initialize them
without logging in to Settings. Follow the procedure below to create an initialization drive.

Notes:

• Initializing settings with the USB drive is available for the same TeraStation unit that created the initialization

drive.

• Normally, making and using the initialization drive will not affect data on the TeraStation. However, always

back up your data regularly!

• This USB drive can be used to recover the system if your TeraStation doesn't boot at all. In this case, if the data

partition is damaged, then all your data will be deleted by the recovery process.

Creating an Initialization Drive

Insert a 1 GB or larger USB drive (not included) into a USB port on the TeraStation.

Note:

All data on the USB drive will be erased!

In Settings, click

Management

Содержание TeraStation 5010

















































































































































































Результаты поиска

Содержание TeraStation 5010

Отзывы:

Похожие инструкции для TeraStation 5010

Бренды по названию

Популярные бренды

Buffalo TeraStation 5010, Руководство пользователя

Результаты поиска

Содержание TeraStation 5010

Отзывы:

Похожие инструкции для TeraStation 5010

Бренды по названию

Популярные бренды