Buffalo TeraStation 5010, Руководство пользователя

Страница: 117 / 176

116
Encrypting FTP Transfer Data
Using SSH Encryption
You can encrypt passwords using SSH for secure FTP communication. First, open a shared folder's settings and
click
Edit ; under "LAN Protocol Support", select the "SFTP" checkbox and click OK . Also, you have to enable the SFTP
service by moving the SFTP switch to the on position on "File Sharing".
SSL Keys
SSL keys are used during setup screen operations and FTP communication. SSL (Secure Socket Layer) is a type of
encryption system called public key encryption. Generally, SSL is managed by the two files below.
server.crt (SSL Certificates)
The TeraStation sends the file to a computer, and the computer uses it to perform encryption. The TeraStation
receives the encrypted data and uses server.key (the private key) to decrypt the data.
In SSL, this key contains the server certificate, and depending on your computer environment, a check may be
performed to determine the trustworthiness of the certificate. The server certificate included in the TeraStation in
the default settings was created by Buffalo, and in some cases the message "There is a problem with this website's
security certificate" may be displayed in your browser or other software. Disregard this message and continue.
server.key (SSL Private Key)
This file is used as a pair with server.crt (server certificate). This is required for decrypting the data that was
encrypted by the server certificate, and this is normally not revealed.
Note:
The passphrase for the private key must be removed before importing to the TeraStation.
Updating SSL Key Files
To update a server certificate and a private key for SSL, follow this procedure.
1
In Settings, click Management .
2
Click SSL .
3
Register "server.key" for "Secret Key" and "server.crt" for "Server Certificate (.crt)", then click Import .
Notes:
• Place the SSL key files (server.key, server.crt) directly below the C root drive. The SSL key files may not be able
to be updated if it is placed in folders or paths that contain multibyte characters.
• If Settings cannot be displayed after updating, initialize the TeraStation settings.
• Updating the firmware initializes an SSL key.
SNMP
If SNMP is enabled, you can browse your TeraStation from SNMP-compatible network management software.
1
In Settings, click Network .