background image

26

Chapter 3 File Sharing

have to connect to the TeraStation via AFP in order to display or copy files that contain these symbols in their 
filenames.
? ] [ / \ = + > < ; : " , | *

•  Do not use any of the following words for the name of a shared folder as these words are reserved for internal 

use by the TeraStation: authtest, global, homes, info, lost+found, lp, msdfs_root, mt-daapd, printers, ram, spool, 
usbdisk 

x

 (where “x” is a number, for example: usbdisk1)

•  Don’t use the following unsupported characters in shared folder names, workgroup names, or filenames:

①②③④⑤⑥⑦⑧⑨⑩⑪⑫⑬⑭⑮⑯⑰⑱⑲⑳ⅠⅡⅢⅣⅤⅥⅦⅧⅨⅩ

ⅰⅱⅲⅳⅴⅵⅶⅷⅸⅹ㎜㎝㎞㎎㎏㏄㎡№㏍℡㊤㊥㊦㊧㊨㈱㈲㈹㍾㍽㍼㍻㍉㌔㌢㍍㌘㌧㌃㌶㍑㍗㌍㌦㌣㌫㍊

㌻¦'"〝〟∮Σ∟⊿

纊褜鍈銈蓜俉炻昱棈鋹曻彅丨仡仼伀伃伹佖侒侊侚侔俍偀倢俿倞偆偰偂傔僴僘兊兤冝冾凬刕劜劦勀勛匀匇匤

卲厓厲叝﨎咜咊咩哿喆坙坥垬埈埇﨏塚增墲夋奓奛奝奣妤妺孖寀甯寘寬尞岦岺峵崧嵓﨑嵂嵭嶸嶹巐弡弴彧德

忞恝悅悊惞惕愠惲愑愷愰憘戓抦揵摠撝擎敎昀昕昻昉昮昞昤晥晗晙晴晳暙暠暲暿曺朎朗杦枻桒柀栁桄棏﨓楨

﨔榘槢樰橫橆橳橾櫢櫤毖氿汜沆汯泚洄涇浯涖涬淏淸淲淼渹湜渧渼溿澈澵濵瀅瀇瀨炅炫焏焄煜煆煇凞燁燾犱

犾猤猪獷玽珉珖珣珒琇珵琦琪琩琮瑢璉璟甁畯皂皜皞皛皦益睆劯砡硎硤硺礰礼神祥禔福禛竑竧靖竫箞精絈絜

綷綠緖繒罇羡羽茁荢荿菇菶葈蒴蕓蕙蕫﨟薰蘒﨡蠇裵訒訷詹誧誾諟諸諶譓譿賰賴贒赶﨣軏﨤逸遧郞都鄕鄧釚

釗釞釭釮釤釥鈆鈐鈊鈺鉀鈼鉎鉙鉑鈹鉧銧鉷鉸鋧鋗鋙鋐﨧鋕鋠鋓錥錡鋻﨨錞鋿錝錂鍰鍗鎤鏆鏞鏸鐱鑅鑈閒隆

﨩隝隯霳霻靃靍靏靑靕顗顥飯飼餧館馞驎髙髜魵魲鮏鮱鮻鰀鵰鵫鶴鸙黑畩秕緇臂蘊訃躱鐓饐鷯

•  File and folder names may contain up to 255 single-byte characters.
•  Folder and workgroup names whose names contain non-Roman characters may not be displayed correctly.
•  If shared folders are accessed from a macOS device, information files for the macOS device may be generated 

automatically. Do not delete these files. If they are deleted from a Windows device, this may prevent further 
access from a macOS device.

•  The TeraStation belongs to the default zone in AppleShare; the zone cannot be specified.
•  When files are copied to the TeraStation or to a USB drive connected to the TeraStation, file information such as 

date created, date modified, and other date information may be updated or changed.

•  During a file transfer, if settings are changed, the file transfer operation may be aborted.
•  File copying to the TeraStation is protected by a journaling file system. If the Ethernet cable is disconnected or a 

power outage occurs while copying data, the following may occur:

 

Preset data such as the TeraStation name, users, and groups may be erased.

 

An incomplete file may be copied and the file can no longer be deleted. If this occurs, restart the TeraStation, 
delete the file, and perform the copy operation again.

•  If the Ethernet cable is disconnected from the LAN port during file copying, even if the cable is not in use, the 

copy operation will abort. Do not disconnect or reconnect the Ethernet cable to the LAN port during file copying.

Recycle Bin

To protect your data from accidental deletion, you may configure your TeraStation to use a recycle bin instead of 
deleting files immediately. The recycle bin will only work with SMB connections. To empty the recycle bin, click 

File 

Sharing

 > 

Folder Setup

 > 

Empty Recycle Bin

 in Settings. The recycle bins in all shared folders will be deleted.

Notes: 

•  You can prevent guests and other users from emptying the trash by navigating to 

File Sharing

 > 

SMB

 > 

Edit

 and 

select “Administrator only” for the “Permissions” option.

•  If you use macOS, select “Keep when original file is deleted” for the “macOS Temp Files” option by navigating to 

File Sharing

 > 

SMB

 > 

Edit

. If this setting is changed, files in the recycle bin may be corrupted.

Read-Only Shares

By default, new shares are set with read and write access, but you may change the folder attribute to read-only. 
Follow the procedure below to change the shared folder attribute to read-only.

From Settings, navigate to 

File Sharing

 > 

Folder Setup

 and choose a shared folder.

Содержание TeraStation 3010






































































































































































































































Отзывы: