Buffalo TeraStation 3010, Руководство пользователя

Страница: 192 / 229

191
Chapter 7 Advanced Features
Available duration and capacity to save logs will vary depending on the unit. The following values are
available:
• Log destination is set to the system area
Unit (Size): 1–100 for file sizes and 1–13 for all versions
• Log destination is set to a designated folder
◦
Unit (Day): 1–367 for all versions
◦
Unit (Week): 1–53 for all versions
◦
Unit (Month): 1–13 for all versions
◦
Unit (Size): 1–100 for file sizes and 1–13 for all versions
5
Click OK .
Notes:
• To delete the saved logs, click Delete at the window in step 3.
• If there is not enough space to save logs, the
I70
message will appear on the Dashboard in Settings and NAS
Navigator2. If it appears, free up space by deleting the current file access logs. If no free space is made available
elsewhere, older logs will automatically be deleted.
• If the shared folder to which logs are saved was created on a drive or RAID array, and that drive or RAID array is
later changed using RMM, the log folder will be automatically changed to the system area. The
I72
message will
also appear on the Dashboard in Settings and NAS Navigator2.
• You cannot delete a RAID array, format a drive, or change a folder name while file access logs are being saved to
the shared folder.
Updating the Firmware
If a new firmware version is available, a message is displayed when the TeraStation boots. You can update the
firmware either manually or automatically.
Notes:
• If all drives and RAID arrays on the TeraStation have LVM enabled but no LVM volumes have been created, you will
not able to update the firmware from Settings.
• Settings will not be available while the firmware is updating. Don’t try to access Settings from another computer
until the update is completed.
Updating Manually
1
From Settings, click Management .
2
Click the settings icon ( ) to the right of “Update”.
3
Click Install Update .
4
The “Confirm Operation” screen will open. Enter the confirmation number, then click OK .
5
When updating the firmware is completed, refresh the browser and log in to Settings again.