Buffalo LinkStation 200 Series Скачать руководство пользователя страница 64 | Manualshive

Страница: 64 / 142

Buffalo LinkStation 200 Series Скачать руководство пользователя страница 64

4

Select a format type, then click

Format

.

5

The “Confirm Operation” screen will open. Enter the confirmation number, then click

OK

.

6

Depending on the size of your drive, the format may take several minutes or several hours to complete. Either
the

I13

message for RAID arrays, the

I20

message for drives, or the

I28

message for USB drives will appear

on NAS Navigator2 until the formatting process is finished. Click

OK

when finished.

Notes:

• Do not turn off or disconnect power to the LinkStation while formatting a drive.
• For drives that are 2.2 TB or larger, make sure that the “GPT Partition” checkbox is selected. If you accidentally

format a larger drive without GPT, disconnect and then reconnect it before reformatting with GPT.

Erasing Data on the LinkStation Completely

Under some circumstances, data from formatted drives can be recovered. The drive erasure process in this section
does a much more thorough job of erasing data. This procedure is recommended for removing all data from a drive
in a way that makes it nearly impossible to recover with current tools. The LinkStation will then be in the following
state:

•  Both drives in JBOD
•  An empty shared folder on each drive
•  All settings returned to their default values
•  All logs deleted

Follow the procedure below to completely and permanently erase all data from your LinkStation.

1

From Advanced Settings, click

Management

.

2

Click the settings icon (

) to the right of “Restore/Erase”.

63

Chapter 3 RAID Modes and Drive Management

«
...
62
63
64
65
66
...
»

Содержание LinkStation 200 Series















































































































































Отзывы:

Нет отзывов