Buffalo Link Station LS710D Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 204

Buffalo Link Station LS710D Скачать руководство пользователя страница 58

4

The S.M.A.R.T. information for the drive will be displayed. Different information may be displayed depending
on the brand of drives on your LinkStation. Critical attributes are displayed in bold.

Checking the Drive Condition

Attributes with the worst value that is equal to or less than the threshold value may be significant. If an attribute
reports a failure, or has had one in the past, it will be displayed in the status column. In such a case, replacing that
drive is recommended.

Formatting Drives

Notes:

• Under some circumstances, data deleted when a drive is formatted can be recovered. To ensure that data is “gone

forever”, a format might not be sufficient. Refer to the

“Erasing Data on the LinkStation Completely”

section below

for more information.

• After a drive is formatted, the “% Used” and “Amount Used” in Settings will not be 0. This is because some drive

space is used for the system area.

1

From Settings, click

Storage

.

57

Chapter 3 RAID Modes and Drive Management

«
...
56
57
58
59
60
...
»

Содержание Link Station LS710D













































































































































































































Отзывы:

Нет отзывов