Buffalo AirStation WBR2-G54S Скачать руководство пользователя страница 27

Страница: 27 / 95

If there are multiple APs in close proximity using the same channel, there may be interference. In this
case, change to a non-overlapping channel.

Privacy Separator -

Enable or disable communication between wireless clients. If you choose to use this

feature, every wireless client that is associated to the AirStation will not be able to communicate with any
other wireless clients.

■

Note: If this function is used, wired clients can still communicate with wireless clients.

BSS (Basic Service Set) Basic Rate Set -

The transmission data rates offered by the AirStation. It is

recommended to use the ‘Default’ selection to accomidate 802.11 and 802.11b rate sets. It is NOT recom-
mended to use the ‘All’ selection, as some devices may not understand all of the rate sets offered by the
AirStation.

Frame Bursting -

This function increases 802.11g communication throughput by transferring packets more

efﬁ ciently. The following conditions affect this function:

• The wireless LAN client adapter must support Frame Bursting (and it must be enabled). If the wireless

LAN client adapter does not support Frame Bursting, or Frame Bursting is not enabled, then it will
operate at non-Frame Bursting speeds.

125 High Speed Mode -

This function further increases 802.11g communication. Rate sets up to 125

Mbps are offered to clients.The following conditions affect this function:

• The wireless LAN client adapter must support 125 High Speed Mode (and it must be enabled). If the

wireless LAN client adapter does not support 125 High Speed Mode, or it is not enabled, then it will
operate at regular 802.11g speeds.

It is recommended to leave 125 High Speed Mode enabled as it can only help throughput, not hurt it.

Advanced Settings

Содержание AirStation WBR2-G54S
































































































Результаты поиска

Содержание AirStation WBR2-G54S

Отзывы:

Похожие инструкции для AirStation WBR2-G54S

Бренды по названию

Популярные бренды

Buffalo AirStation WBR2-G54S, Руководство пользователя

Результаты поиска

Содержание AirStation WBR2-G54S

Отзывы:

Похожие инструкции для AirStation WBR2-G54S

Бренды по названию

Популярные бренды