SBCIS Cast Iron Burner Stove Instruction Manual
2
Specifications:
Size: 9.2" x 9.2" x 4"
Valve: Zinc
Low Pressure Burner
Output: 8530 BTU/hr
BTU's: 2.5 kw/hr
WARNING
This stove is designed to be used and operated on
LP Liquid Propane Gas (usually found in a gas
cylinder like the type used on gas barbecues.)
You must use an LPHK Regulator (sold
separately) to properly operate the stove, since
the stove will not operate at the gas pressure
coming directly from an LP Liquid Propane Gas
cylinder.
Before each use, always check all gas connections
and joints to make sure no leaks are present. Check
hoses for cracks and wear, and replace damaged
hoses.
When the unit is fully assembled, attach the regulator
hose to the propane tank. The lit burner should
operate with a blue flame, with a small yellow tip.
Adjust the air screw if the flame is sputtering or
popping. If the flame is not operating normally, check
to see if anything is obstructing the gas flow. DO
NOT OPERATE the propane stove if you feel that it is
not operating normally.
LPHK Regulator Hose Kit (Sold
Separately) Required To Use Stove
WARNING
FOR OUTDOOR USE ONLY. USE ONLY IN A WELL-
VENTILATED AREA. DO NOT USE INDOORS.
ASSEMBLY
Turn the burner upside down. Use caution as the
Cast Iron construction does not scratch the surface.
Attach the burner using the supplied screws.
Screw
Screw
Screw
Screw
Attach the gas valve using the supplied screws.
Gas
Valve
1) To Connect The
Regulator Hose To The
Double Burner
Stove
…
2) Use A Wrench To
Connect This End
To Valve.
3) Follow The
Manufacturers
Directions to Hand-
Tighten To Propane
Tank
