Buehler 11-2180, Руководство пользователя, Страница: 19 / 37

IsoMet
®
1000 Precision Saw Accessories
IsoMet
®
1000 Accessories
Catalog No. Description
Chucks
11-1183 Chuck ....................................... Double Saddle Type
11-1184 Chuck ....................................... For Bar and Tube Stock
11-1185 Chuck ....................................... For Irregular Shaped Specimens
11-1186 Chuck ....................................... For Wafers Single Crystals and Thin Sections
11-1187 Chuck ....................................... For Long Samples, Single Saddle Type
11-1188 Chuck ....................................... For Petrographic and Ceramographic Thin Sections
11-1189 Chuck ....................................... For 1-inch or 1 ½-inch Diameter Specimens (Requires
the use of 11-1192 Recessed Flanges)
11-2482 Fastener Chuck ........................ For Longitudinal Sectioning of Fasteners, Tubes, and
Solid Cylinders
11-2489 Specimen Chuck ...................... For 1 ½-inch and 40 mm Mounted Samples
11-2483 Double Saddle Chuck............... 1-inch Diameter Capacity
11-2484 Glass Slide Chuck .................... 27 mm x 46 mm Glass Slide for Thin Sections
11-2488 Glass Slide Chuck .................... 2-inch x 3-inch Glass Slide for Thin Sections
11-2496 Chuck Padding ......................... Applied to Chucks for Holding Brittle or Friable
Specimens
Flanges
11-1191 Flange....................................... 1 ½-inch Diameter, Recessed
11-1192 Flange....................................... 1 ⅜ -inch Diameter, Recessed
(For use with 11-1188 Chuck and 11-1189 Chuck)
11-2282 Flange....................................... 3-inch Diameter
11-2283 Flange....................................... 4-inch Diameter
11-2284 Flange....................................... 5-inch Diameter
Other
11-1190 Dressing Stick .......................... For Dressing Series 15 and 20 Wafering Blades
11-1290 Dressing Stick .......................... For Dressing Series 5 and 10 Wafering Blades
11-2181 Rotating Chuck Accessory ....... For Holding and Rotating Samples up to
2-inch in Diameter
11-2182 Table Saw Attachment ............. For Hand-Cutting Long or Irregular Specimens
11-2186 Splash Shield ........................... For use with the 11-2182 Table Saw Attachment
11-2183 Accessory Weight Set .............. For Increasing Cutting Load to 800 gm
11-2185 IsoMet
®
1000 Goniometer ........ For Sectioning Crystals
11-2293-016 IsoCut
®
Cutting Fluid ........ 1 Pint (.48 liter)
19
MA112180_33 6/27/2005