background image

Operating, Maintenance &

Parts Manual

Series 622

H

a

n

d

 C

h

a

in

 H

o

is

t

Rated Loads:

F

ollow all instructions and warnings for

inspecting, maintaining and operating this hoist.

The use of any hoist presents some risk of personal injury or property

damage.  That risk is greatly increased if proper instructions and

warnings are not followed.  Before using this hoist, each operator

should become thoroughly familiar with all warnings, instructions and

recommendations in this manual.  

Retain this manual for future reference and use.

Forward this manual to operator.  

Failure to operate equipment as directed in manual

may cause injury

.

Before using the hoist, fill in the information below:

Model No.

Serial No.

Purchase Date

Manual No. 622Y-1

Tons

1/2

1

2

3

5

10

Kgs

500

1000

2000

3000

5000

10,000

LOAD LIFTER

®

inspecting, maintaining and operating this hoist.

ollow all instructions and warnings for

inspecting, maintaining and operating this hoist.

10

Kgs

500

1000

Rated Loads:

Kgs

Series 622

Series 622

1

2

Tons

1/2

Series 622

Rated Loads:

Series 622

Rated Loads:

Series 622

LOAD LIFTER

LOAD LIFTER

a

d

 C

n

d

n

ddd

n

nn

n

n

nnn

n

n

dd

nn

d

nn

d

Содержание LOAD LIFTER 622 Series











Отзывы:

Похожие инструкции для LOAD LIFTER 622 Series