Boiler block assembly
8
Logano GE515 - We reserve the right to make any changes due to technical modifications.
38
z
Fit the rectangular thermal insulation (Fig. 44,
[1]
)
with cut-outs to the top front above the door.
z
Secure the thermal insulation with three spring clips
(Fig. 44,
[2]
) to the block thermal insulation.
z
Push the longitudinal rails (Fig. 45,
[1]
and
[2]
), as
already described, with pre-fitted screws into the
mounting bracket recesses, and tightly secure using
these screws.
z
Slide the thermal insulation for the rear section
(Fig. 46,
[1]
) onto the flue outlet. Ensure that the cut-
out for the boiler return (Fig. 46,
[2]
) points upwards.
z
Hook the thermal insulation of the rear section with
four spring clips onto the boiler block thermal
insulation.
z
Close the gap below the flue outlet with a spring hook
(Fig. 46,
[3]
).
Fig. 44 Installing the front thermal insulation
1
2
Fig. 45 Installing the longitudinal rails
1
2
Fig. 46 Installing the thermal insulation on the rear section
3
1
1
2
