CWB-15101 Instruction sheet rev 7-2022
pg. 1
CWB-15101 Instruction sheet
Thank you for using BUD’s corner mounting bracket.
NOTE: This product is designed to help mount any of BUD Plastic and Aluminum diecast enclosures
from 3” up to 14” wide, and up to a total of
25 Lb.
Assembly:
1.
start with connecting the mounting tray (15101-CE) to the enclosure mounting strip (15101-MB)
using one of the ¼”
carriage
bolts and one ¼” wing nut
paying attention to place the nut on the
tray side.
2.
with the enclosure mounting surface up (so mounting holes are visible), place the mounting
strip you have just assembled on the mounting surface so the carriage bolt is near the middle of
the enclosure mounting edge. based on the mounting screws size, allign either the narrow or
wide slots with the mounting holes in the enclosure (you may need to flip the mounting strip so
it is alway overlapping with the enclosure and not hanging down).
The matching holes may shift
the center of the strip off the center of the enclosure.
NOTE: The enclosure can be mounted upword or downword from the bracket
.
NUT
UP (recommended)
DOWN
CWB-15101 kit
includes:
Qty
part
1
15101-CB
1
15101-CE
1
15101-MB
2
¼”
-
20 X ½”
CARRIAGE
BOLT
2
¼”
-
20 X ½”
WING NUT
2
#8X2”
DRYWALL
SCREWS
1
INSTRUCTION
SHEET
