Buckleys DRY ROOF PRO2, Быстрый старт, Страница: 4 / 12

Quick Start Guide
4
EC Declaration of Conformity
We, Buckleys (UVRAL) Ltd., as sole manufacturer of the apparatus listed below, declare that the
product
Dry Roof Pro2 is manufactured in conformity with the following directives: 2014/30/EU ,
2014/35/EU and 2015/863/EU.
Date: 01/07/2021
Authorised by:
J P Hoveman
CEO, Buckleys (UVRAL) Ltd.
UKCA Declaration of Conformity
We, Buckleys (UVRAL) Ltd., as sole manufacturer of the apparatus listed below, declare that the
product
Dry Roof Pro2 is manufactured in conformity with the following UK legislation: Electronic
Compatibility Regulations 2016 , The Electrical Equipment (Safety) Regulations 2016 and Restriction of the
Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 .
Date: 01/07/2021
Authorised by:
J P Hoveman
CEO, Buckleys (UVRAL) Ltd.
Specifications
Note: Due to ongoing technical developments, all stated information is typical and is subject to change
without notice or obligation.
•
Output voltage range: 0.9kV – 40kV
•
Max. output current: <1mA (continuous)
• Alarm sensitivity range: 10μA to 450μA
(factory-set to 200 μA)
•
Recommended coating thickness range:
13μm – 25.6mm (using NACE SP0274)
•
Built-in test standard compliance: NACE
SP0274/ NACE SP0490/NACE SP0188/ASTM
D5172/ASTM G62/ISO 21809-2
†
•
Unit: 1.64kg, 172mm x 85mm x 235mm
• Handle: 720g, 290mm x 85mm
Output voltage range:
•
Packed weight: 13.6kg
• Dimensions (packed): 510 x 250 x 630mm
• Battery type: 4 x D-cell/LR20
•
Meter accuracy: <10kV: +/- 10V. >=10kV +/-
100V
•
Current meter FSD: 450μA
• Maximum relative humidity: 80% non-
condensing
•
Working altitude: <2000m
•
Temperature range: 0ºC - +40ºC
Model Low Range Increment High Range Increment Polarity Battery Life
Dry Roof Pro2 0.9kV-10kV 10V 10.1kV-40kV 100V Positive 8 hours
* Test conducted in accordance with BS EN50356. Test units fitted with 10,000mAh NiMH rechargeable cells. Instrument output voltage set
to maximum.
† These standards are pre-programmed and are provided for convenience. However, it is the user’s responsibility to ensure that the
correct settings are chosen for the intended application of this unit.