BUCKINGHAM MFG.
PN 5004BQ2 BuckArrester Mobile Fall Arrester (MFA)
Ladder Positioning & Harness Attachment
Instructions / Warnings
The PN 5004BQ2 BuckArrester Mobile Fall Arrester (MFA) is one component of a Lifeline system to be used with Buckingham PN 128R
,
PN RFPBASIC and PN RFPDELUXE.
This product when used by an individual with a weight of 350 lbs. (fully equipped) meets
applicable requirements of OSHA 1926.502.
Note: hardware / material colors may vary from that shown.
Attaching the PN 5004BQ2 BuckArrester Mobile Fall Arrester (MFA) to the Lifeline:
1.
Ensure the UP arrow on the frame of the BuckArrester is facing the top of the ladder and up the lifeline (Fig. 1
–
2).
2.
Rotate the cam up into the open position (Fig. 3).
3.
Insert the tail of the lifeline through the top of the BuckArrester channel between the frame and the cam (Fig. 4
–
5).
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Integral Attachment
Carabiner (Z359.12)
UP Arrow
(Must Point to Anchor)
Cam Lever
Locking Nut
Integral Lanyard
(with Impact load indicator)
BuckArrester
(MFA)
Frame
Fig. 1
BuckArrester
Mobile Fall Arrester
(MFA)
(Patent Pending)
Shoulder Bolt
5004BQ2 BuckArrester_112917 (Rev. 11/08/18)
1 of 4
PN 230425
Fig. 3
Fig. 4
Fig. 5
Fig. 2
Top of the
Ladder / Lifeline
Fig. 6
