BUCKINGHAM MFG.
Adjustable Body Belt Adjustment Instructions
The Buckingham adjustable body belt (Patent Pending / Stacked Four D-ring Body Belts are Patented) has been
designed with an adjustable man rated upper belt strap and an adjustable lower work positioning Dee piece that
allows the user to customize the size of their body belt.
Adjustable Belt Strap Adjustment Instructions:
To Lengthen the Adjustable Belt Strap:
1.
Lay the belt on a flat surface with the belt strap facing up (Fig. 1)
2.
Rotate the adjustment buckle 90° so it is perpendicular to the strap (Fig.2)
3.
Feed extra webbing from top of strap through the adjustment buckle forming a slack loop (Fig. 3)
4.
Pull webbing slack loop from the bottom, away from the buckle, lengthening the strap to the desired length.
5.
Once adjusted, lay the buckle flat against the strap and pull excess strap towards the billet end of the belt, flattening the strap (Fig. 4)
To Shorten the Adjustable Belt Strap:
1.
Lay the belt on a flat surface with the belt strap facing up (Fig. 1)
2.
Rotate the adjustment buckle 90° so it is perpendicular to the strap (Fig. 5)
3.
Create slack in the belt strap by pulling the billet side of the strap towards the adjustment buckle (Fig. 6)
4.
Feed extra webbing from bottom of strap through the adjustment buckle forming a slack loop (Fig. 7)
5.
Pull webbing slack loop from the top, away from the buckle, lengthening the strap to the desired length.
6.
Once adjusted, lay the buckle flat against the strap and pull excess strap towards the billet end of the belt, flattening the strap (Fig. 8)
20192CM Adjustable Body Belt Adjustment Inst (Rev. 10/2/19) 1 of 2
PN 230417
Belt Strap Adjustment Buckle
Dee Piece
Adjustment Buckle
(located under lower strap)
section
Fig. 1
Adjustable Belt Strap
Adjustable
Dee Piece
Work Positioning
D-Ring
Work
Positioning
D-Ring
Fig. 2
Fig. 3
Fig. 4
Billet End
Buckle End
Note: hardware / material colors may vary
from that shown.
(PN 20192CM shown)
Fig. 5
Fig. 6
Fig. 7
Fig. 8
