Buchi SyncorePlus Скачать руководство пользователя страница 6

Страница: 6 / 56

1 | About this document

BÜCHI Labortechnik AG

6/56

Operation Manual SyncorePlus

About this document

This operation manual is applicable for all variants of the instrument.

Read this operation manual before operating the instrument and follow the instruc-
tions to ensure safe and trouble-free operation.

Keep this operation manual for later use and pass it on to any subsequent user or
owner.

BÜCHI Labortechnik AG accepts no liability for damage, faults and malfunctions re-
sulting from not following this operation manual.

If you have any questions after reading this operation manual:

Contact BÜCHI Labortechnik AG Customer Service.

https://www.buchi.com/contact

1.1

Warning notices in this document

Warning notices warn you of dangers that can occur when handling the device. There
are four danger levels, each identifiable by the signal word used.

Signal word

Meaning

DANGER

Indicates a danger with a high level of risk which could result in
death or serious injury if not prevented.

WARNING

Indicates a danger with a medium level of risk which could result in
death or serious injury if not prevented.

CAUTION

Indicates a danger with a low level of risk which could result in mi-
nor or medium-severity injury if not prevented.

NOTICE

Indicates a danger that could result in damage to property.

1.2

Symbols

The following symbols are displayed in this operation manual or on the device:

1.2.1

Warning symbols

Symbol

Meaning

General warning

Device damage

Hot surface

Hand injuries

Dangerous electrical voltage

Содержание SyncorePlus

























































Результаты поиска

Содержание SyncorePlus

Отзывы:

Похожие инструкции для SyncorePlus

Бренды по названию

Популярные бренды

Buchi SyncorePlus, Руководство по эксплуатации

Результаты поиска

Содержание SyncorePlus

Отзывы:

Похожие инструкции для SyncorePlus

Бренды по названию

Популярные бренды