Buchi Syncore, Руководство по эксплуатации

Страница: 18 / 46

Syncore
Platform
18
5 Operation
Exceeding the maximum temperature
Do not under any circumstances continue using the unit
when the temperature displayed is above 155°C. Contact a
BUCHI service agent immediately in such a case.
Moving parts
Various parts of the accessories are accelerated in the ho-
rizontal plane to speeds of up to 600 rpm. This means that
the machine may cast off parts that have not been fastened
correctly and present a risk for the operator and the labo-
ratory equipment. Whenever you have any doubts about
how well an accessory part has been fastened, switch the
unit OFF immediately and, if necessary, contact a BUCHI
service agent.
Never touch moving parts with your hand or with other
laboratory equipment.
An incorrect speed of rotation, eccentricity, or unbalance
compensation can cause the unit itself or the area around it
to vibrate strongly. In that case, stop the shaking movement
and correct the settings.
The unit must never vibrate so strongly that it can move about
on the base on its own or cause laboratory equipment to
change position.
Never under any circumstance put the unit into operation if
you have any doubts about the condition of these vibration
elements. Inform a BUCHI service agent immediately.
It is not permissible for any objects to penetrate into the
inside of the unit while it is in operation, nor is it permissible
to make any adjustments of the eccentricity or unbalance
compensation under such circumstances.
Noises
If ever any strong noises should occur during operation, take
the unit out of operation immediately and contact a BUCHI
service agent.
Error messages
The unit must not continue in operation after an error message
has been received unless it has been possible to determine the
cause of the error and eliminate the error. Otherwise, contact
a BUCHI service agent.
Refer here also to the chapter, „Error messages.“