background image

3  Technical data

16

K-425 / K-436

 Operation Manual, Version B

3 .2 

Technical data

3 .2 .1 

SpeedDigester K-425 / 110 – 120 V version

Technical data

Power consumption

max. 1280 W

Temperature control range

level 1 to 10 (70 – 580°C typically)

Connection voltage

110 – 120 VAC

Input fuse

T 10A L 250 V

Frequency

50 / 60 Hz

IP degree of protection (two digits)

IP 20

Explanation of protection level:

2   Protection provided by the enclosure against access 

to hazardous parts (e.g., electrical conductors, 
moving parts) and the ingress of solid foreign objects 
with a diameter of > 12,5 mm.

0   No protection of the equipment inside the enclosure 

against harmful ingress of water.

Insulation category

II

Environmental   conditions:

Pollution degree

2  (for indoor use only)

Temperature

5 – 40 °C

Altitude (above sea level)

up to 2000 m

Humidity (curve parameter)

Maximum relative humidity 80% up to 31 °C, then 
decreasing linearly to 50% relative humidity at 40 °C

Dimensions in mm (W 

×

 D 

×

 H)

310 × 620 × 540

Net weight

12 kg

Rack (without glassware)

2,5 kg

Содержание SpeedDigester K-425



























































Отзывы: