6 | Software
Büchi Labortechnik AG
42/62
Operation Manual Sepiatec SFC-250
6.7
RUN METHOD tab
1
2
3
4
5
6
7
8
9
No.
Name
Description
1
Chromatogram
The current chromatogram is shown in the
upper section of the window.
2
Title bar
The method name and sample name are dis-
played in the title bar.
The injection number can be seen in the title
bar.
3
Process overview graph
In the process overview graph in the bottom
left-hand corner, chromatograms are dis-
played overlaid in case of multiple injections.
In case of stack injection, the collected frac-
tions are displayed overlaid.
4
Parameter status
The status of individual system parameters
and method parameters during the run is
shown in the table in the bottom right-hand
area.
5
[PEAK CONTROL]
button
(grey)
Peak control is off.
[PEAK CONTROL]
button
(green)
Peak control is on. The position of the peaks
has not changed compared to the first injec-
tion.
[PEAK CONTROL]
button (or-
ange)
Peak control is on. The peak being monitored
has moved and the collection window was
adjusted automatically.
[PEAK CONTROL]
button
(red)
Peak control is on. The peak being monitored
is outside the collection range and the run
was stopped.
