6 | Software
Büchi Labortechnik AG
34/62
Operation Manual Sepiatec SFC-250
6.5
COLLECTION tab
1
2
3
4
5
6
7
8
9
10
11
12
13
14
No.
Name
Description
1
COLLECTION
tab
To configurate fractionation conditions, num-
ber of peaks to be collected and the fraction-
ation method.
2
[Load Run]
button
To open completed runs.
3
[Save Report]
button
Allows the operator to save a report in PDF
format.
4
[TIME]
button
Chooses the time based fractionation.
5
[PEAK]
button
Chooses the peak based fractionation.
6
[T/P]
button
Switches on the combined fractionation.
In this mode, the peaks are searched inside
the programmed intervals.
7
Peak No.
Number of peaks to be collected.
8
Vial
Fractionation bottle in which the fraction is
collected.
9
Start min
Start of fractionation.
Start AU
This value is the threshold for the start of col-
lection.
10
Stop min
End of fractionation.
Stop AU
End of peak detection.
11
Stack injection
To start and stop stack injection.
12
Stack time
The time between one injection and the next.
13
Start peak detect time
To starts the detection mode and control the
peaks.
14
Peak control
To set parameters for multiple injections.
