Buchi Scrubber K-415 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 58

background image

2 Safety

8

K-415 Operation Manual, Version B

2 .4

Safety warnings and safety signs used in this manual

DANGER, WARNING, CAUTION and NOTICE are standardized signal words for identifying levels of
hazard seriousness of risks related to personal injury and property damage. All signal words, which are
related to personal injury are accompanied by the general safety sign.

For your safety it is important to read and fully understand the table below with the different signal
words and their definitions!

Sign Signal word

Definition

Risk level

DANGER

Indicates a hazardous situation which, if not avoided, will result in
death or serious injury.

★★★★

WARNING

Indicates a hazardous situation which, if not avoided, could result
in death or serious injury.

★★★☆

CAUTION

Indicates a hazardous situation which, if not avoided, may result
in minor or moderate injury.

★★☆☆

no

NOTICE

Indicates possible property damage, but no
practices related to personal injury.

★☆☆☆

(property damage only)

Supplementary safety information symbols may be placed in a rectangular panel on the left to the
signal word and the supplementary text (see example below).

Space for

supplementary

safety

information

symbols.

!

SIGNAL WORD

Supplementary text, describing the kind and level of hazard / risk seriousness.
•  List of measures to avoid the herein described, hazard or hazardous situation.
•  ...
•  ...

Table of supplementary safety information symbols
The reference list below incorporates all safety information symbols used in this manual and their
meaning.

Symbol

Meaning

General warning

Electrical hazard

Harmful to life-forms

Inhalation of substances

«
...
7
8
9
10
11
...
»

Содержание Scrubber K-415



























































Отзывы:

Нет отзывов

Похожие инструкции для Scrubber K-415

Бренд: NARGESA Страницы: 33

Бренд: Raymarine Страницы: 55

Бренд: Halyard Страницы: 4

Underwater Light Show & Fountain

Бренд: GAME Страницы: 2

Бренд: Tascam Страницы: 80

Бренд: Tascam Страницы: 2

Бренд: Walker Страницы: 24

Бренд: Rapid Technic Страницы: 152

Бренд: vanEE Страницы: 52

Бренд: Caddon Hives Страницы: 3

Бренд: Cadex Страницы: 300

Бренд: ZIGBEE Страницы: 6

Бренд: Daisy Страницы: 2

Below Ground Pool Cover Box

Бренд: Daisy Страницы: 3

Бренд: Jacto Страницы: 12

Бренд: Sagola Страницы: 62

Бренд: Garmin Страницы: 2

Бренд: KUHN Страницы: 112

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды