BÜCHI Labortechnik AG
Installation | 5
Operation Manual Rotavapor® R-300
37/116
The recommended fluid for use in the heating bath is water. Normal tap water may be
mixed with distilled water with a mixing ratio of up to 1:1 according to the water
hardness.
u
Slide the Heating Bath B-300 Base (2) onto the base of the Rotavapor R-300.
u
Make sure that there are no objects in the Rotavapor base recess as this is where
the data is transferred from the heating bath base to the Rotavapor by infra-red
signals.
u
Place the heating bath (1) centrally on the base.
u
Fill the heating bath with suitable fluid.
5.14
Fitting the protection shield (optional)
The protection shield protects against solvent splashes, hot heating fluid splashes
and glass splinters in the event of implosions.
NOTE
The protection shield only protects against splashes to the front. Protection against
splashes in other directions must be provided by the user.
2
1
Fig. 18: Fitting the protection shield on the Rotavapor
1
Screw holes
2
Button on handle
u
Insert the studs on the protection shield mounting bracket into the screw holes (1)
on the Rotavapor drive unit.
