Buchi Rotavapor R-300 Скачать руководство пользователя страница 22

Страница: 22 / 116

4 | Transport and storage

BÜCHI Labortechnik AG

22/116

Operation Manual Rotavapor® R-300

Transport and storage

4.1

Transport

NOTICE

Risk of breakage due to incorrect transportation

Make sure that the device is fully dismantled and all parts of the device are safely
packed in such a way as to prevent breakage, ideally in the original box.

Avoid sharp movements during transit.

After transportation, check the device and all glass components for damage.

Damage that has occurred in transit should be reported to the carrier.

Keep packing for future transportation.

4.2

Storage

Make sure that the ambient conditions are complied with (see Chapter 3.5 "Tech-
nical data", page 19).

Wherever possible, store the device in its original packaging.

After storage, check the device, all glass components, seals and tubing for dam-
age and replace if necessary.

Содержание Rotavapor R-300





















































































































Результаты поиска

Содержание Rotavapor R-300

Отзывы:

Похожие инструкции для Rotavapor R-300

Бренды по названию

Популярные бренды

Buchi Rotavapor R-300, Руководство по эксплуатации

Результаты поиска

Содержание Rotavapor R-300

Отзывы:

Похожие инструкции для Rotavapor R-300

Бренды по названию

Популярные бренды