Buchi Rotavapor R-220, Руководство пользователя

Страница: 8 / 46

8
BÜCHI Rotavapor R-220
4 Putting into Operation
Fig. 3: Support rod
4.3 Setting up the Support Rod
• Place the support rod
햳
into the holder provided for it and
lower it into the foot hole at the back. Fix it tight using the
locking screw
햲
.
• Put the positioning ring
햴
on over the rod, 150 mm below
the upper edge.
• Lay the pivoting clamp
햵
on top of the positioning ring.
• Attach the pivoting clamp for the receiving flask 200 mm
above the bottom edge of the rod.
When installing an interchangeable receiver:
• Place the short support rod into the holder at the front and
lower it into the foot hole. Screw it tight using the locking
screw.
• Attach the pivoting clamp approx. 200 mm above the lower
edge of the rod.
햲
햴
햳
햵