5 Putting into operation
41
R-220 Pro Continuous Operation Manual, Version A
5 7
Condenser clamps
a
b
c
Flat spring
a
Turn the lever counterclockwise to loosen / open the clamp It is not necessary to completely open the clamp!
b
Pull the support o-ring onto the rod Shift the opened clamp with the flat spring side onto the rod until it
touches the o-ring The clamp weight is now supported by the o-ring
c
Insert the condenser with the mounted holder (here illustrated without condenser!) into the free end of the
clamp Turn the fixation screw clockwise to fixate the condenser in its position
