Buchi Rotavapor R-100, Руководство по эксплуатации

Страница: 19 / 60

BÜCHI Labortechnik AG Product description | 3
Operation Manual Rotavapor® R-100 19/60
3.5 Safety features
3.5.1 Overheat cut-out
To protect against overheating, the heating bath has a thermostatic bath temperature
control.
In addition it is fitted with an electronic and a mechanical overheat cut-out.
The electronic overheat cut-out monitors the temperature limit, the heating rate and
the function of the temperature sensor. If the electronic overheat cut-out trips, the de-
vice should be inspected by a BUCHI service technician.
The mechanical overheat cut-out consists of a bi-metallic thermostat that immediately
cuts off the power supply at high temperatures (above 145 °C). The mechanical over-
heat cut-out has to be manually reset once the heating bath has cooled down (see
Chapter 8.2.1 "Resetting overheat safety cut-out", page 44).
3.5.2 Protection against electrical overload
The Heating Bath B-300 Base is fitted with a safety fuse.
The rotary drive unit has an electrical overload cut-out.
3.5.3 Clips and holders
—
Combi-clip for fixing the evaporating flask and safe release of sticking ground-glass
joints
—
Ball joint clamps for securely fixing the receiving flask
— Laboratory stand and holder for fixing glass apparatus
— Cap nut for fixing the condenser
3.5.4 Glassware
— Inert borosilicate glass 3.3
— GL14 hose barbs for preventing glass breakage
—
Optional feature: P+G plastic-coated glass
3.5.5 Optional accessories
— Safety guard to protect user against glass splinters, solvent splashes or hot heating
fluid in the event of accidents or implosions
—
Laboratory stand for providing additional fixing for condenser
For more information, see Chapter 10.2 "Spare parts and accessories", page 48.