Buchi Lyovapor L-300 Скачать руководство пользователя страница 25

Страница: 25 / 118

Büchi Labortechnik AG

Transport and storage | 4

Operation Manual Lyovapor™ L-300/L-300 Pro

25/118

Transport and storage

4.1

Transport

NOTICE

Risk of breakage due to incorrect transportation

Make sure that the instrument is fully dismantled.

Pack every instrument components properly to prevent breakage. Use the original
packaging whenever possible.

Avoid sharp movements during transit.

After transporting, check the instrument and all glass components for damage.

Damage that has occurred in transit should be reported to the carrier.

Keep packaging for future transportation.

4.2

Storage

Make sure that the ambient conditions are complied with (see Chapter 3.6
"Technical data", page 21).

Wherever possible, store the device in its original packaging.

After storage, check the device, all glass components, seals and tubing for
damage and replace if necessary.

Содержание Lyovapor L-300























































































































Результаты поиска

Содержание Lyovapor L-300

Отзывы:

Похожие инструкции для Lyovapor L-300

Бренды по названию

Популярные бренды

Buchi Lyovapor L-300, Руководство по эксплуатации

Результаты поиска

Содержание Lyovapor L-300

Отзывы:

Похожие инструкции для Lyovapor L-300

Бренды по названию

Популярные бренды