background image

Büchi Labortechnik AG

Operating the control panel | 6

Operation Manual Lyovapor™ L-200/L-200 Pro

35/100

6

Operating the control panel

This section describes the operation of the instrument using the control panel.

 CAUTION

Risk of injury from glass splinters

Sharp objects can damage the display.

u

Keep sharp objects away from the display.

NOTICE

Unnecessary operation hours can affect the lifetime of the instrument.

Turn off the instrument if no samples are proceeded for several days.

6.1

Layout of the control panel

4

3

2

1

6

5

Fig. 15: Layout of the control panel

No.

Description

Function

1

Status bar

Shows the current status of the instrument.

2

Menu bar

Shows symbols representing the menus.

3

Content area

Shows current settings, submenus or actions
depending on current operation.

4

Function bar

Shows functions that can be performed ac-
cording to the current operation.

5

Navigation control

Used for navigating the user interface.
Pressing the control performs the assigned
function on the function bar.

6

Function buttons

Pressing a function button performs the as-
signed function on the function bar.

Содержание Lyovapor L-200





































































































Отзывы: