Buchi KjelFlex K-360, Руководство по эксплуатации

Страница: 34 / 72

6 Operation
34
KjelFlex K-360 Operation Manual, Version D
Change password
Define a new user
Switch to previous screen e.g. in Service Test
Switch to next screen e.g. in Service Test
Confirm a message or affirm a question
Negate a question
Backward button to move to the previous digit
Forward button to move to the next digit
Move up within the entries of a screen
Move down within the entries of a screen
6 .3 Overview on how to prepare the instrument for routine operation
Configure the software according to the following steps to prepare it for routine operation:
1. Standard instrument configuration
2. Distillation methods
3. System preparation
4. Individual working methods
6 .3 .1 Standard instrument configuration
This configuration consists of typical settings, which have to be defined before the instrument is used
for the first time. As long as the instrument is not updated or extended by any additional optional
accessory these settings do not have to be changed again.
The settings are carried out in the menu Configuration.
6 .3 .2 Distillation methods
The distillation methods you like to use can be defined in the menu Method. For this purpose you use
an existing Buchi standard method and modify it to your needs. Thus you can define up to 50 indi-
vidual methods according to e.g. distillation time, aspiration yes/no, volume of boric acid/NaOH/water,
etc.
6 .3 .3 System preparation
The system preparation is carried out every day before the instrument is taken into operation and an
analysis is started. It consists of e.g. filling the hoses and priming the system.