Büchi Labortechnik AG
Safety | 2
Operation Manual K-365 Dist Line
13/106
2.8.1
Hot surfaces
The surfaces of the device can become very hot. If touched they can cause skin
burns.
u
Do not touch hot surfaces or else wear suitable protective gloves.
2.8.2
Faults during operation
If a device is damaged, sharp edges, moving parts or exposed electrical wires can
cause injuries.
u
Regularly check device for visible damage.
u
If faults occur, switch off the device immediately, unplug the power cord and
inform the operator.
u
Do not continue to use devices that are damaged.
2.8.3
Glass breakage
Broken glass can cause severe cuts.
Minor damage to the ground joints impairs the sealing effect and may therefore
diminish suction capacity.
Handle the glass components carefully and do not drop them.
Always place the glassware in a suitable holder when they are not in use.
Always visually inspect glass components for damage every time they are to be
used.
Do not continue to use glass components that are damaged.
Always wear protective gloves when disposing of broken glass.
2.8.4
Not suitable titrators
Not suitable titrators can lead to malfunction and wrong results.
u
Use recommended titrators only.
2.8.5
Dosing pump defect
A defect dosing pump can spill hazardous liquids on the installation site.
u
Set the On / Off master switch to Off.
u
Disconnect the power supply.
u
Use personal protective equipment to remove the liquid.
u
Dispose of the remains of the liquid according to the local legal regulations.
2.9
Modifications
Unauthorized modifications can effect safety and lead to accidents.
u
Use only genuine BUCHI accessories, spare parts and consumables.
u
Carry out technical changes only with prior written approval from BUCHI.
u
Only allow changes to be made by BUCHI service technicians.
BUCHI accepts no liability for damage, faults and malfunctions resulting from
unauthorized modifications.
