Büchi Labortechnik AG
Cleaning and servicing | 7
Operation Manual Inert Loop S-395
29/34
Precondition:
R
The sensor has been calibrated, in case it is a
new sensor. See Chapter 7.5 "Calibrating the
oxygen analyzer", page 23.
R
The communication cable is disconnected.
u
Install the oxygen sensor.
ð
Screwing force was chosen that sensor is
clearly fixed, but not excessively hard.
%
u
Fit the cable plug on the sensor.
u
Connect the sensor cable by rotating the
securing ring of the cable plug.
%
u
Reconnect the communication cable, see
Chapter 3.2.1 "Front view", page 10.
u
Install the grounding cable.
u
Install the front cover.
u
Place the screws at the indicated positions.
u
Connect the power cable.
