Büchi Labortechnik AG
Installation | 5
Operation Manual Inert Loop S-395
19/34
u
Make sure that the lever of the condensate
drain valve is in the position indicated.
5.5
Installing the oxygen sensor for the first time
The primary installation of the oxygen sensor for a new instrument will be guided by
a BUCHI service technician. For further information see Chapter 7.7 "Changing the
oxygen sensor", page 27.
5.6
Installations for a spray drying mode
For installations for a spray drying mode, see separate installation manuals.
"MiniSprayDryer S-300 in closed mode with Dehumidifier and Inert Loop"
"MiniSprayDryer S-300 in closed mode with Inert Loop"
"MiniSprayDryer S-300 in open pressure mode"
"MiniSprayDryer S-300 in open suction mode"
