BÜCHI Labortechnik AG
Installation | 5
Operation Manual FatExtractor E-500
31/88
u
Put the tank bottle in the instrument.
5.9
Preparing the instrument for Soxhlet Extraction
5.9.1
Installations for Soxhlet Extraction
u
Prepare the condenser. See Chapter 5.13 "Preparing the condenser",
page 36
u
Prepare the extraction glass chamber Soxhlet. See Chapter 5.9.3 "In-
stalling the extraction glass chamber Soxhlet", page 32
u
Install the protection shields. See Chapter 5.12.1 "Installing two protec-
tion shields (Soxhlet only)", page 35
u
Select the Soxhlet method on the interface. See Chapter 5.14 "Selecting
a configuration", page 39
5.9.2
Preparing the extraction glass chamber Soxhlet
NOTICE
Risk of broken parts by using tools
Using tools for preparing the instrument can break parts.
u
Tighten all parts with your hands.
u
Attach the valve to the extraction glass cham-
ber at the point indicated.
NOTICE! Make sure that the sensor is not bent
during carrying out this action step
u
Attach the sensor to the extraction glass
chamber.
