BÜCHI Labortechnik AG
Installation | 5
Operation Manual FatExtractor E-500
29/88
Precondition:
R
The coolant connection complies with the
specified parameters. See Chapter 3.5 "Tech-
nical data", page 22
R
Make sure that the instrument is not con-
nected to the power supply.
u
Install the inlet tube onto the connection
marked
CW IN
.
u
Attach the inlet tube in place with a hose clip.
u
Install the drain tube onto the connection
marked
CW OUT
.
u
Attach the drain tube in place with a hose clip.
5.6
Connecting the solvent tubes to the condenser tank bottle
Precondition:
R
Make sure that the instrument is not con-
nected to the power supply.
u
Attach the inlet tube onto the connection
marked
TANK IN
.
u
Attach the drain tube onto the connection
marked
TANK OUT (SOLVENT)
.
u
Attach a solvent connection nut with seals to
the connection marked
OUT
.
u
Attach a solvent connection nut with seals to
the connection marked
IN (SOLVENT)
.
u
Attach the inlet tube onto the connection
marked
OUT
.
u
Attach the drain tube onto the connection
marked
IN (SOLVENT)
.
u
Make sure that the solvent collector circuit is
complete. See Chapter 14.1 "Schematics",
page 81
