manualshive.com logo in svg

Buchi FatExtractor E-500, Руководство по эксплуатации

Buchi FatExtractor E-500 - инновационный прибор для извлечения жира из образцов. Получите подробное руководство по эксплуатации с бесплатным скачиванием нашего Operation Manual с нашего веб-сайта. Будьте уверены в правильной работе прибора, загрузив его с manualshive.com.

Поделиться
Скачать
background image

BÜCHI Labortechnik AG

Installation | 5

Operation Manual FatExtractor E-500

27/88

5

Installation

5.1

Before installation

NOTICE

Instrument damage due to switching it on too early.

Switching on the instrument too early after transportation can cause damage.

u

Climatize the instrument after transportation.

5.2

Installation site

The installation site must meet the following requirements:

—

Firm, level surface

—

Make sure that the installation site meets the requirements of the safety data
sheets for all solvents and samples used.

—

Inside a fume hood or minimum 500 mm space requirement above the instrument.

—

Make sure that no instruments generating heat or corrosive vapors are in the same
fume hood (e.g. HydrolEx H-506).

—

Take into account the maximum product dimensions and weight. See Chapter 3.5
"Technical data", page 22

—

Do not expose the instrument to any external thermal loads, such as direct solar
radiation or other ignition source.

—

Do not place any flammable devices or substances close to the instrument, as they
could ignite due to the heat from the heating plates.

—

Make sure that cables / tubes can be routed safely.

NOTE

Make sure that the power supply can be disconnected at any time in an emergency.

5.3

Establishing electrical connections

NOTE

Observe the regulatory provisions when connecting the instrument to power supply.

4

Use external main switches (e.g., emergency off) in accordance with the stan-
dards IEC 60947-1 and IEC 60947-3.

4

Use additional electrical safety features (e.g., residual-current circuit breakers) to
comply with local laws and regulations.

The power supply must fulfill the following conditions:

1. Provide the mains voltage and frequency specified on the type plate of the instru-

ment.

2. Be designed for the load imposed by the instruments connected.

3. Be equipped with suitable fuses and electrical safety features.

4. Be equipped with a proper grounding.

Содержание FatExtractor E-500

























































































Отзывы:

Нет отзывов

Похожие инструкции для FatExtractor E-500

Calistair C300 Translation Of The Original Operating Instructions preview
C300
Бренд: Calistair Страницы: 44
Ecco 10 Series Mounting Instructions preview
10 Series
Бренд: Ecco Страницы: 3
Yamaha V50 Use Manual preview
V50
Бренд: Yamaha Страницы: 78
Fast 8200 Operation Manual preview
8200
Бренд: Fast Страницы: 42
DARAY V60 Manual preview
V60
Бренд: DARAY Страницы: 28
Haenim 3G Manual preview
3G
Бренд: Haenim Страницы: 2
Panasonic WJHD100 - DIGITAL DISC RECORDE Specifications preview
WJHD100 - DIGITAL DISC RECORDE
Бренд: Panasonic Страницы: 7
Raymarine i70 Installation & Operation Instructions preview
i70
Бренд: Raymarine Страницы: 90
JB Systems Sirius Operation Manual preview
Sirius
Бренд: JB Systems Страницы: 7
3B SCIENTIFIC PHYSICS 1023095 Instruction Sheet preview
1023095
Бренд: 3B SCIENTIFIC PHYSICS Страницы: 36
3A HEALTH CARE HAPPYNEB III Instruction Manual preview
HAPPYNEB III
Бренд: 3A HEALTH CARE Страницы: 16
360 Systems Short/cut 2000 Audio Editor Specification preview
Short/cut 2000 Audio Editor
Бренд: 360 Systems Страницы: 4
Olsen Sprint Quick Operation Manual preview
Sprint
Бренд: Olsen Страницы: 4
Fakir HYPO CLEAN Fast User Manual preview
HYPO CLEAN
Бренд: Fakir Страницы: 22
Federal Signal Corporation AD Series Wiring And Maintenance Instructions preview
AD Series
Бренд: Federal Signal Corporation Страницы: 4
ParaBody GS2 User Manual preview
GS2
Бренд: ParaBody Страницы: 7
Jeio tech Lab companion SI-300 Operating Instruction preview
Lab companion SI-300
Бренд: Jeio tech Страницы: 69
JDS Uniphase IP Video Test Option HST-3000 Product Manual preview
IP Video Test Option HST-3000
Бренд: JDS Uniphase Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды